Can You Use the Bissell Crosswave as Just a Vacuum

Whether cleaning your home floor or making your carpet rinse, using a vacuum is a perfect option. However, there are different types of vacuums available that can do these jobs without needing water. 

The Bissell Crosswave is one of the vacuums that have this type of functionality. But you may ask “Can you use the Bissell Crosswave as just a vacuum?”. 

Yes, the Bissell Crosswave may be used only as a vacuum. This vacuum has been developed to perform two distinct roles. It may be used as a vacuum cleaner and a floor mop. If you wish to use it as a vacuum, though, you must empty the tank. Then rub it on your carpets or floor to see how much mud or filth is sucked up.

Can you use the Bissell CrossWave as just a vacuum on the carpet?

Yes, you can use the Bissell Crosswave as just a vacuum. This vacuum comes specially designed to complete two different functions. You can use it like a vacuum cleaner as well as a floor mop. 

However, if you want to use it as a vacuum, you need to empty its tank. Then rub it on your floor or carpets and you will see all the mud or dirt being sucked up.

Related

Can I Use Bona in My Hoover Floormate
Rejuvenate vs Bona Floor Cleaner
Can You Use Mr. Clean On Hardwood Floors

How do I use my Bissell CrossWave as a vacuum only?

Yes, you can use the Bissell CrossWave as just a vacuum only. The process is described below. 

Step 1: Removing the water tank

The Bissell Crosswave comes with two water tanks. One is for providing clean water to wash an area. The other one is for removing all the dirt and storing it. 

However, you have to remove the clean water tank from the Bissell CrossWave to use it as just a vacuum. 

To do it, 

  • you need to lift the clean water tank from the Bissell Crosswave. 
  • remove the tank from it. 
  • Make sure it turns off the mopping function of the Bissell Crosswave and starts working just like a vacuum.

Step 2: Providing power to the vacuum

To use the Bissell Crosswave as a vacuum without water, you need to power it. Without providing enough electricity, it won’t run. 

To do it,  

  • You need to plug in the vacuum first. 
  • After that, attach it to a dedicated grounded outlet. 
  • Click on the “cleaning mode” button on the top side of the vacuum. 
  • Now, put that vacuum on the hard floor or the dirty rug. 
  • After that, click on the “power button” of the vacuum cleaner. 

It will start vacuuming.

Step 3: Starting with brush roll spinning

After you have provided the electric power to Bissell Crosswave, you need to start brushing the rugs or the hard floor. To do it,

  • Recline the Bissell Crosswave in backward rotation. 
  • After a few rotations, start pushing the vacuum in one direction and get back in the opposite direction. 
  • Then pull it at an angle while cleaning the corner. 
  • Pass all the areas of the floor where there is dirt to clean those areas.

Step 4: Turning off the vacuum

To do it,

  • Make sure to clean all the areas perfectly.
  • Recheck your rugs and floors so that there won’t be any dirt. 
  • After that, you need to click on the “Cleaning Mode” button again to turn off the Bissell CrossWave vacuum. 
  • Check if it is completely turned off or not. 
  • Then you need to unplug it from its power source.

Can the Bissell CrossWave just vacuum without water?

Yes, the Bissell Crosswave can be used just like a vacuum without water. To use it, you need to follow the upper written instructions and remove all the water from the Bissell CrossWave. Then provide electric power to it and just use it to brush the dirt and muddy areas and clean them properly. 

Conclusion 

The Bissell Crosswave is very popular because of its multifunctionality. It can also be used without water, which makes it almost like a vacuum. So, looking at its characteristics, you may wonder, “Can you use the Bissell Crosswave as just a vacuum?” 

Yes, you can. To use it in just a vacuum, you need to remove all the water from it and dry it. After that, power it on and then just use it to rub all the muddy and dirty areas to clean them.

While cleaning the areas, make sure to rub the Bissell CrossWave in a circular motion. Don’t provide extra pressure or you could damage it. After cleaning the areas, make sure to turn off the vacuum, or you could get an electric shock.

Leave a Comment